Car Refinishes

1.hard paint film. 2.high gloss. 3.good resistance. 4.good hiding power. 5.bright and long lasting color.

1kMetallic

1. Specifications:          This product is high solids, high-quality, single-component basecoat 1k car, you can create silver, pearl and solid color, with excellent adhesion and intercoat adhesion, hiding power, fast drying, Construction is easy, can form a durable non-fade, tough film.          This product absorbs the international advanced silver (pearl pink) positioning processing technology, full range, accurate color, can provide excellent hiding power and flicker effect, and not easy to produce blur, color and other undesirable phenomena floating .      mating with Hans clear,    1k metallic paint can form round pearl, transparent film, bright, highly three-dimensional, fully displaying the noble quality. Spray vehicle for all types of vehicles or partial repair.

1K metallic paint	thinner
1	0.8

 2. Mixing ratio:                   (1) If a small area of repair:            

               (2) for the whole car spray:

the proposed increase of about 10% of the curing agent, and its close adhesion between layers will be better,

1K pearl silver paint	curing agent	thinner
1	0.1	0.7

 3. Spraying methods:            The first thin spray, and the second, three wet spray,  layer interval of 5 to 10 minutes to complete and then use the lacquer varnish.  4. Applies to:            The p1000 sandpaper wet paint to remove the old oil products and Hans in the priming of the surface.  5. Note:            (1) Prepare the proportion of reference only, the general, as the ambient temperature may be, to appropriate spray viscosity is appropriate.            (2) when spraying on the thermoplastic paint, wet spray between 2-3  layer , rub the interval until 10 to 15 minutes.    

2K Solid 

1. Specifications:

            This is the high solid, the high quality, the double component 2k solid color automobile topcoat, the product variety is complete, color bright and accurate, hiding power is excellent .mating with BG220 the hardener and the general thinner, after the construction may result in tough , flexible ,bright and well-rounded film.

            The product uses European Famous Factory the high quality raw material, the varnish film bears scrub, the external attack and chemical corrosion . It reflects the nature especially to be splendid fresh and insightful feeling. All kind of vehicles spray coating or partial patching.

 2. Mixing ratio:

2K solid color	HG220 Hardener	General Thinner
2	1	10-30%

     

 

 

 

 3. Storage tank time:                  20'c about 4 hours  4. Applies to:                 the surface of the old paint dry completely after polishing with the p800-p1000 sandpaper, 5. Note:                 (1) when spraying, pay attention to the flash dry time between layers.                 (2) to ensure the spraying effect, please use the ancillary products.                 (3) different temperature, using the appropriate hardener and thinner.                 (4) film should be dry completely before repairing or polishing.       

 

Car Refinishes